Enable 2 captive portal in pFsense
-
Good afternoon,
Gentlemen, I need your help.I have a PFsense, version 2.4.0, with 3 network cards (1 WAN and 2 LAN).
LAN 1 - Network 10.10.1.0/20
LAN2 - Network 20.20.1.0/20.I need to implement 2 captive portal, 1 on each LAN.
LAN 01 - Captive portal used by employees, authentication via Radius. It's working correctly.
LAN 02 - Captive portal used by visitors. I use only vouchers to authenticate.
In this scenario, the captive portal recognizes that the user is authenticated. It does not allow access to the internet. Displays the message that squid is blocking.
When I see the squid log. Squid does not recognize the authentication performed on the Captive portal. In the Captive Portal log shows that the voucher has been validated.
In short,
All authentication done on LAN 2 Squid does not recognize authentication.
What should I do to solve it? -
….
In short,
All authentication done on LAN 2 Squid does not recognize authentication.
What should I do to solve it?Remove squid, test again.