I am not totally sure if i have posted in the correct forum, i do not know the exact cause so not sure where to put it(it could be the package, or the routing or something else).

I am using pfsense 2.4.2-RELEASE-p1 (amd64) on a device with 5 physical network interfaces (4 lan and 1 wifi).
ethernet 1 - used for emergency connections to the box –> 192.168.1.1
ethernet 2 - VLAN 100 and 300
ethernet 3-  VLAN 700
ethernet 4 - WAN

VLAN100 10.10.10.0/24 pfsense ip/gateway = 10.10.10.1 / DHCP scope 10.10.10.100 - 10.10.10.200
VLAN300 10.10.30.0/24 pfsense ip/gateway = 10.10.30.1 / DHCP scope 10.10.30.100 - 10.10.30.200
VLAN300 10.10.70.0/24 pfsense ip/gateway = 10.10.70.1 / DHCP scope 10.10.70.100 - 10.10.70.200

i have configured and Squid(with Squidgaurd )proxy, with listening interface 10.10.70.1

I have made a succesfull VPN connection, and mapped it to an host on VLAN 300 (10.10.30.201) (specifed gateway)
This works, the traffic for the machine goes through the VPN, while traffic from other hosts goes through the WAN(aka default gw)
I have used this tutorial to accomplish this:
https://pixelsandwidgets.com/2014/10/setup-pfsense-openvpn-client-specific-devices/

When i access my squid proxy from the 10.10.70.0/24 network my traffic is redirected through the VPN
When i disable the proxy on my client my traffic is going through the wan.

I would like to have the proxy not use the VPN as gateway but my regular WAN, please advice.

Thanks you in advance