PfSense as a DHCP relay routing to the same subnet / network conflicts
What I'm working with.
Edge Router Lite
Default Network on ETH0 0 x.x.186.3
VLAN 333 on ETH1 - DHCP RELAY enabled
DHCP Relay enabled on pfsense box to relay at x.x.186.1 (my primary pfsense LAN gateway).
On pfSense , I created the 333 VLAN, setup the interface 10.3.33.1/24 ; I can get a DHCP address on my laptop. This works perfect.
Now I'm trying to route from the x.x.186.0/24 network to this network.
I then added to pfSense a gateway of x.x.186.3. (ETH 0 on EdgeRouter Lite)
In the pfsense routing table, If I try to add a static route / destination network of 10.3.33.0/24 -> x.x.186.3 0- I get the error messsage of "This network conflicts with the address configured on interface 333.
What is the best way to tell other devices on the network primary x.x.186.0/24 that 10.3.33.0/24 is at x.x.186.3? Should I be using DHCP static route options? Seems I'm missing the general best practice on this setup.
THANKS for any help
Is this x.x.186 network public - why are you obfuscating it?
Please draw your network.. Saying you have network A and network B doesn't tell us how you have it connected together. Any router connected to another router should have a transit network, or more likely then not your going to have asymmetrical routing unless doing host routing on each device in what is the transit network.