Help me get RIP to work pls
-
Hi i have two pfsense boxes, one is my gateway, the other is connecting one of my internal subnets, i enable RIP and activated it on both local interfaces, my problem is the boxes doesnt seem to get and update their routing tables aoutomaticaly from the RIP updates, i planned to add a couple more subnets and dont want to have to configure everything statically. thank you.
-
Did you active it on at least 2 interfaces on both machines?
If you dont enable it on at least 2 interfaces they wont exchange any information (no point to exchange nothing ;) ) -
Thank you very much, but i have another problem, how do i make my gateway to advertise its self to all other routers in my LAN that it is the default route to the Internet. Thank you
-
Per DHCP or a static route.
-
i want to do it automatically, if that not possible then do it static, pls show me how to do it either ways. thanks lots
-
Please first get a basic grasp of how routing works and what a routing table is.
A good place to start is:
http://en.wikipedia.org/wiki/Routing
http://en.wikipedia.org/wiki/Routing_tableTry modifyng the routing table of one pfSense via "System –> Static routes" and observe the changes under "Diagnostic --> Routes".