• just I have one HTTP server and I need to publish this server with port 80

    I need to be maped for the server on port 80

    I tryed all these topics

    bothe server and LAN they have internt access without problems , but NAT is not working.
    please what I can do?

  • LAYER 8 Global Moderator

    If you went over the troubleshooting doc then you would know what your problem is..

    Sniff as you send traffic - its in the doc.  Does pfsense see the inbound traffic on its wan?  Does it send it on?

    Common problem is firewall on host your trying to forward to, or it using a different gateway then pfsense - if traffic doesn't get back to pfsense never going to work.  Other common problem is traffic never even gets to pfsense to forward.

  • Thank you johnpoz
    I just add on siwtch

    ip route

    Thnk you

  • LAYER 8 Global Moderator

    How is it that your downstream clients would have internet via pfsense if your downstream switch didn't have default route pointing to pfsense?

    Lets say client sent ping to to its gateway on the switch at say, if switch didn't have default route how would of it sent that traffic to pfsense for those clients to have internet?  So when you say your client and server had internet - how was that working without switch having route?  Where they set to use a proxy on pfsense at  So the switch knew how to get there?

Log in to reply