<![CDATA[Routing LAN Interfaces via IPsec Tunnel]]>Hello,

I have a Problem with my routing first I will show you my Setup:

Network 1:

Interface A1: LAN 10.0.0.0/24

Interface A2: WAN AAA.AAA.AAA.AAA

Network 2:

Interface B1: LAN 10.42.0.0/24

Interface B2: LAN 10.42.1.0

Interface B3: WAN BBB.BBB.BBB.BBB

Network 1 and Network 2 are connected via IPsec.
I can ping from A1 to B1.

I can ping from B1 to B2.

I can't ping from A1 to B2

Is it because of the IPsec tunnel?
Do I need Static Routing or a Rule?
I cant even Ping the Interface IP of B2 (10.42.1.1) from A1

BR, Stefan

]]>https://forum.netgate.com/topic/130593/routing-lan-interfaces-via-ipsec-tunnelRSS for NodeFri, 10 Apr 2026 08:26:35 GMTMon, 07 May 2018 09:52:52 GMT60<![CDATA[Reply to Routing LAN Interfaces via IPsec Tunnel on Sat, 19 May 2018 06:57:03 GMT]]>both sides pfsense?

]]>https://forum.netgate.com/post/767045https://forum.netgate.com/post/767045Sat, 19 May 2018 06:57:03 GMT<![CDATA[Reply to Routing LAN Interfaces via IPsec Tunnel on Mon, 07 May 2018 20:18:25 GMT]]>The routing over the IPSec tunnel is done by IPSec. So maybe your IPSec configuration is wrong.
Post the config, please.

]]>https://forum.netgate.com/post/764650https://forum.netgate.com/post/764650Mon, 07 May 2018 20:18:25 GMT