HA firewall cant use virtual interfaces on wan for SSH
-
I have two dell 1u servers that I am using for a High Avilability System and I have a block of static ip addresses for my buisness and my virtual interface for the HA WAN is .4 and my R1 is .2 and my R2 is .3 but I have clients that are trying to connect to .7. my LAN virt interface is 192.168.176.4 and R1 is 192.168.176.2 and R2 is 192.168.176.3. My clients arte trying to access 192.168.176.171 via SSH and I have portforwarded it and I have put it in the 1:1 NAT tab too but still no luck. When I ping .7 from R1 it says it can see it and its up and i get my pings back but from the external network I cant get into it. But I can SSH into R1 and R2 from the external network. And when I VPN into my network I can SSH into 192.168.176.171 so I know that it is up and that not the issue. Also when I put a full ip address like 192.168.176.4 that means I am reffering to my LAN and when I put something like .3 that means i am reffering to my static ips from comcast and i only put .3 for obveous reasons I didnt know if that would help. Can anybody else please help