Routing between WAN and LAN?
Lennydk87 last edited by
I have a test setup I want to make working before we implement it in our production enviroment.
VMware ESXI host on that host there is:
Pfsense01 (WAN: 192.168.1.6 (Production) - LAN: 220.127.116.11 - This is the router between our production and test enviroment.
Pfsense02 (WAN: 18.104.22.168 - LAN: 192.168.10.1 - This is the router I want to be able to route between WAN and LAN network)
I have a DC with DHCP, DNS on 172.10.10.x network, and I some clients on 192.168.10.x network, I want the clients and the DC to talk to each other.
I cant seem to get this working, I've enabled "Disable all packet filtering" on PFsense02 but I cant seem to get the routing going.
From the client I can ping the 192.168.10.x network and 22.214.171.124.
viragomann last edited by
On pfSense02 you have to remove the check at "Block private networks" in the WAN interface settings, since the WAN net you want to provide access is a private address range.
Additionally you have to add a route to the 172.10.10.x network devices for the 192.168.10.x network pointing to 126.96.36.199. You may do this on your DHCP.
Further you have to add a firewall rule on pfSense02 to the WAN interface to allow the wanted access.
Assuming you still have the default allow-any rule on the LAN interface in place.
marvosa last edited by
I understand this is a test setup, but the first question is... why are you using public IP's on your LAN?
Then... instead of us making assumptions, provide a network map to show how are things connected, so we can get a better view of your objective.
Lastly, what is your objective? Why are there two firewalls? Is there a reason 192.168.10.0/24 needs to be behind a 2nd firewall?