Network config for a /29
-
Forgive me if this is a dumb question, however I have a machine co-lo'd that runs a few VM's. (Esxi)
Unfortunately due to a problem it's having to be moved, which requires a change of network configuration.
The new configuration is based on a /29 which is routed via a specific Ip.At the moment everything goes through a pfSense vm running as a transparent filtering bridge, although that will probably need to change (I know ideally it should be a separate machine but I cannot afford to co-lo another machine just to be used as a firewall :( )
-
What is your problem?
A diagram would help. -
What is your problem?
A diagram would help.My problem is the machine is physically being moved, where where as before i just had 16ip's and I simply added them and it worked.
The new setup is 3 "Primary" ips with a /29 routed via one of the primary ip's.
Presumably i need to activate some kind of routing function? (or place a router infront of the box, which hopefully I don't need to do as that would cost me a lot more)
-
Set the 'primary' IP (I assume these are not part of the /29, and this needs to be the address the upstream router is 'next hopping' for your /29) as your WAN interface address. Set the /29 up as your LAN side, and assign addresses to your VMs as required (use /29 or 255.255.255.248). Shouldn't need to do much else.
Keep in mind though that a /29 is only 6 usable addresses, and you probably want the firewall to have one of those.
-
Set the 'primary' IP (I assume these are not part of the /29, and this needs to be the address the upstream router is 'next hopping' for your /29) as your WAN interface address. Set the /29 up as your LAN side, and assign addresses to your VMs as required (use /29 or 255.255.255.248). Shouldn't need to do much else.
Keep in mind though that a /29 is only 6 usable addresses, and you probably want the firewall to have one of those.
Sorry its actually a /28 I typod it :-[
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy