TCP doesn't work through 1:1 virtual IP
-
Hello,
I am trying to setup a simple 1:1 public IP (virtual) to LAN IP, from outside I can ping, UDP seems to work but any TCP connection does not, seems packets are lost. I cannot get out from local server 192.168.7.100 (apt-get update doesn't work, TCP traffic seems to not getting out) but I can ping google.comConfiguration is :
-
Virtual IP set
-
pfsense interfaces assignments are good : LAN IP is 192.168.7.2
-
1:1 Virtual IP to LAN IP 192.168.7.100
-
Outbond 192.168.7.0/24 * * * Virtual IP public *
-
On 192.168.7.100 gw is pfsense LAN IP 192.168.7.2
-
WAN rules IPv4 TCP/UDP * * ->LAN Net * *
-
LAN rules is IPv4 LAN net * * * *
I tried some advanced setting as ignore traffic on same interface but nothing works.
I can ping 192.168.7.100 from outside, pinging Virtual IP public... -
-
How about you pose all of those screenshots instead.
@mars said in TCP doesn't work through 1:1 virtual IP:
1:1 Virtual IP to LAN IP 192.168.7.100
Outbond 192.168.7.0/24 * * * Virtual IP public *I do not know why you would do this. 1:1 means just that. 1:1. It looks like you are also trying to outbound NAT the whole /24 to the same VIP which should work fine. But I honestly do not know what would happen in that case.
@mars said in TCP doesn't work through 1:1 virtual IP:
WAN rules IPv4 TCP/UDP * * ->LAN Net * *
This also makes little sense.. You should be passing traffic to 192.168.7.100, not LAN net.