<![CDATA[Route specific IP Range via IPSEC VPN.]]>

<![CDATA[Route specific IP Range via IPSEC VPN.]]>Hi

I'm trying to work out how to route some traffic.

I have an IPSEC VPN to a remote office. Traffic to and from the remote site is fine.

Local IP - 192.168.16.0/24
Remote Office IP - 192.168.19.0/24

From the remote office is a VPN to a hosted data centre.
Host IP - 10.0.0.0/24

From my PC I can ping anything on the 192.168.19.0/24 network, but not on the 10.0.0.0/24 network.
If I SSH to device on 192.168.19.2 I can then ping 10.0.0.1

From My PC if I traceroute 10.0.0.1 I see that attempt to route out via my broadband connection, so I assume I need to add a route to say any 10.0.0.0/24 traffic route via IPSEC VPN.

Can some one advice how I do this ?
Thanks

]]>https://forum.netgate.com/topic/135327/route-specific-ip-range-via-ipsec-vpnRSS for NodeTue, 13 Oct 2026 21:45:26 GMTThu, 06 Sep 2018 13:50:26 GMT60<![CDATA[Reply to Route specific IP Range via IPSEC VPN. on Thu, 06 Sep 2018 16:02:50 GMT]]>You need to add Phase 2 entries to cover the traffic between 192.168.16.X and 10.0.0.X. Those need to be on both tunnels.

Steve

]]>https://forum.netgate.com/post/788054https://forum.netgate.com/post/788054Thu, 06 Sep 2018 16:02:50 GMT