-
Hi
I'm trying to work out how to route some traffic.
I have an IPSEC VPN to a remote office. Traffic to and from the remote site is fine.
Local IP - 192.168.16.0/24
Remote Office IP - 192.168.19.0/24From the remote office is a VPN to a hosted data centre.
Host IP - 10.0.0.0/24From my PC I can ping anything on the 192.168.19.0/24 network, but not on the 10.0.0.0/24 network.
If I SSH to device on 192.168.19.2 I can then ping 10.0.0.1From My PC if I traceroute 10.0.0.1 I see that attempt to route out via my broadband connection, so I assume I need to add a route to say any 10.0.0.0/24 traffic route via IPSEC VPN.
Can some one advice how I do this ?
Thanks -
You need to add Phase 2 entries to cover the traffic between 192.168.16.X and 10.0.0.X. Those need to be on both tunnels.
Steve
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy