<![CDATA[Error Lan - route: route has not been found]]>I have an error in my pfSense 2.4.3

Next, when I leave only the configured WAN I can ping DNS 8.8.8.8 and any other site, but when I configure the lan interface to do DHCP and distribute the internet I can not even ping through pfSense itself.

At the end of the Lan interface configuration, your

Reloading routing configuration ... route: writing to routing socket: Network is unreachable
route: route has not been found

Can someone help me?

English written by Uncle Google Translate

]]>https://forum.netgate.com/topic/135345/error-lan-route-route-has-not-been-foundRSS for NodeSun, 18 Oct 2026 00:38:52 GMTThu, 06 Sep 2018 19:52:15 GMT60<![CDATA[Reply to Error Lan - route: route has not been found on Tue, 11 Sep 2018 18:09:52 GMT]]>Makes no sense.. Have you messed with your outbound nat?

]]>https://forum.netgate.com/post/788988https://forum.netgate.com/post/788988Tue, 11 Sep 2018 18:09:52 GMT<![CDATA[Reply to Error Lan - route: route has not been found on Tue, 11 Sep 2018 17:57:39 GMT]]>Config Lan
0_1536688588117_79e5feb1-c207-4c3a-a31a-3c0f7f65576d-image.png

Config Wan
0_1536688612065_5ac093e3-d746-4d86-8d8d-f6fc8d586916-image.png

Yes, it is in DHCP because I have a router that distributes the ip to it.

When I disable Lan, I go to the shell of pfSense, option Ping Host and type 8.8.8.8 it drops normal, if active Lan no longer works

]]>https://forum.netgate.com/post/788984https://forum.netgate.com/post/788984Tue, 11 Sep 2018 17:57:39 GMT<![CDATA[Reply to Error Lan - route: route has not been found on Mon, 10 Sep 2018 13:12:19 GMT]]>I think your assuming there jknott.. Have seen it countless countless times where the client places a gateway on their lan interface directly... just completely ignoring all the warnings that this is more than likely WRONG!! Both in the gui and in the setup phase, etc.

@glhrme please clarify your setup on pfsense lan interface - there should be NO gateway on it, and for sure you wouldn't point a gateway to your own address if you did have downstream networks.

]]>https://forum.netgate.com/post/788613https://forum.netgate.com/post/788613Mon, 10 Sep 2018 13:12:19 GMT<![CDATA[Reply to Error Lan - route: route has not been found on Mon, 10 Sep 2018 13:06:57 GMT]]>@emammadov said in Error Lan - route: route has not been found:

You have mentioned Gateway 10.0.0.1 here, delete it. You can't have 2 gateways at the same machine.

I think he means that the DHCP server is configured to give that gateway address to clients and 10.0.0.1 is the appropriate address.

]]>https://forum.netgate.com/post/788610https://forum.netgate.com/post/788610Mon, 10 Sep 2018 13:06:57 GMT<![CDATA[Reply to Error Lan - route: route has not been found on Mon, 10 Sep 2018 13:23:18 GMT]]>You have mentioned Gateway 10.0.0.1 here, delete it. You can't have 2 gateways at the same machine. Check and tell the result. From where do you want to access pfsense? Through wan or lan?

]]>https://forum.netgate.com/post/788588https://forum.netgate.com/post/788588Mon, 10 Sep 2018 13:23:18 GMT<![CDATA[Reply to Error Lan - route: route has not been found on Mon, 10 Sep 2018 11:04:58 GMT]]>As well?

My gateway is in the same IP range as the machines, if I leave with the IP of the wan page I will be able to access?

Wan Configuration
ipv4 191.36.208.82
gateway 191.36.208.81
Mask 255.255.255.252 (30)

Lan Settings
10.0.0.1 - ipv4
DHCP - 10.0.0.1 - 10.0.0.254
Gateway 10.0.0.1

How should I do?

]]>https://forum.netgate.com/post/788585https://forum.netgate.com/post/788585Mon, 10 Sep 2018 11:04:58 GMT<![CDATA[Reply to Error Lan - route: route has not been found on Fri, 07 Sep 2018 05:55:40 GMT]]>If you have writen gateway to lan interface, delete it.

]]>https://forum.netgate.com/post/788182https://forum.netgate.com/post/788182Fri, 07 Sep 2018 05:55:40 GMT