Phase 2 / Tunnel IPv4 / 2.4.4
-
Hello Together
I configured the Field "Local Network" always with 0.0.0.0/0 until 2.4.3.
Now there is also the Field "Remote Network".
What should i configure there now?I follow this Guide:
https://www.netgate.com/docs/pfsense/vpn/ipsec/ikev2-with-eap-tls.htmlMany Thanks
Regards
Alitai -
Just found out that this should not be there:
Remote Network (If using a Tunnel mode):
This option (only present for non-mobile tunnels) specifies the IP Address or Network that exists on the other (remote) side of the VPN. It operates similarly to the Local Network option mentioned previously.
Removed everything and now the field is not longer there.
Problem solved!
Thanks
Regards
Alitai