UPnP & NAT-PMP not working
-
I have a Virtual Pfsense firewall running on vmware esxi 6.5, the Pfsense version 2.3.4. I need to allow port 1500 on additional network (vLAN), I configured UPnP & NAT-PMP but unable telnet port 1500, also do not see any session in status "UPnP & NAT-PMP"
Following are the interfaces configured on the firewall
- Wan
- Lan
- Lan1 - /24 network I need to open port 1500
UPnP & NAT-PMP configuration :
Enable UPnP & NAT-PMP = enable
Allow UPnP Port Mapping= enable
External Interface = Wan
Interfaces = LAN1 (Selected)
Default Deny = Deny access to UPnP & NAT-PMP by default. Checked
ACL Entries = allow 1024-65535 10.40.40.0/24 1024-65535, even tried 1500 10.40.40.0/24 1500 still no luck.Any help or suggestion please
-
Can someone please help me on this.