ExpressVPN gateway monitoring
-
This has come up a lot - I have read a ton of posts here and on reddit - and there seems to be no definitive answer.
I have setup my pfsense with one expressvpn client. the gateway shows as offline with 100% packet loss, but seems to be working fine. The various solutions offered are:
-
turn off gateway monitoring ( system -> routing -> gateways). so failover doesnt work then.
-
plug in an ip like 8.8.8.8 as the gateway monitoring ip, because expressvpn gateway doesn't pass icmp - shows over 40% packet loss
-
use the gateway ip of expressvpn - 100% packet loss
-
increase the loss interval thresholds under system -> routing -> gateways -> advanced. didnt work for me.
-
someone even suggested dumping expressvpn for another like PIA. however, I have found other non expressvpn posts with the same issue.
none of this worked for me. Is gateway monitoring for expressvpn on pfsense not possible at this point?
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy