<![CDATA[Not getting access to my bluehost webmail services as soon as Pfsense is on.]]>When the internet connection is directly connected to a machine, I can login to my webmail login - Bluehost. However, placing pfsense in the middle every other webmail works fine but Bluehost. There is not SQUID OR PFBLOCKERNG configured. I can get access to everywhere. Hitting the login button is like refreshing the web and never it goes in.

I will appreciate the help.

]]>https://forum.netgate.com/topic/137477/not-getting-access-to-my-bluehost-webmail-services-as-soon-as-pfsense-is-onRSS for NodeSun, 14 Jun 2026 10:47:38 GMTTue, 06 Nov 2018 02:54:43 GMT60<![CDATA[Reply to Not getting access to my bluehost webmail services as soon as Pfsense is on. on Thu, 08 Nov 2018 14:40:54 GMT]]>You can try enabling sticky connections in System > Advanced > Miscellaneous.

If that doesn't work then you will need to set a policy route the webmail server that only uses one WAN.

Almost all sites can handle load balanced source IPs gracefully these days but you do occasionally still find a site that fails.

Steve

]]>https://forum.netgate.com/post/803230https://forum.netgate.com/post/803230Thu, 08 Nov 2018 14:40:54 GMT<![CDATA[Reply to Not getting access to my bluehost webmail services as soon as Pfsense is on. on Thu, 08 Nov 2018 10:25:29 GMT]]>running 2.4.4.

I do have configure load balancing with two WAN connection from different ISP and they works perfectly but when they do I can no longer access to my email. I place my email address and my password and when I hit the login botton it just refreshing the webpage and never goes in. Taking one WAN connection off I can logging with no problem, just with one WAN no matter what WAN I take off. What should I do?

]]>https://forum.netgate.com/post/803167https://forum.netgate.com/post/803167Thu, 08 Nov 2018 10:25:29 GMT<![CDATA[Reply to Not getting access to my bluehost webmail services as soon as Pfsense is on. on Thu, 08 Nov 2018 03:15:34 GMT]]>Do you have load-balanced WANs? That can behave like that.

Otherwise check the link MTU. Check the WAN in Status > Interfaces especially if you have a DHCP WAN.

Are you running 2.4.4?

Steve

]]>https://forum.netgate.com/post/803138https://forum.netgate.com/post/803138Thu, 08 Nov 2018 03:15:34 GMT