Console access
-
Does anyone know if there is a way to connect a Netgate SG-8860 or similar device to a cisco console server? What i want to try is using a USB A to Mini B F/M cable and then connect that to a usb to rj45 cable. From there run the normal
copper cable to a patch panel port that the console connection is plugged into on the other side. Hopefully that makes senseLayout:
pfsense console port--->usb A to mini B F/M cable-->usb to rj45 cable->patch panel port side A-->patch panel port side B -->octal cable to cisco serverGoal: connect to netgate console through the cisco console server
-
It looks like you have the USB parts connected incorrectly there. The USB console connection in the 8860 is the device end it must connect to a USB host. You would need something active in the middle to connect both that and the USB-RJ45 cable to and bridge the serial connections. It looks like you're just trying to connect them together which won't work.
What console server are you using exactly? A lot have USB connectivity now.Steve
-
Cisco 2901
It has 2 usb ports but i think those arent for console. I guess its just not possible. Wish it had an RJ45 console connection.
-
@joelt said in Console access:
Cisco 2901
That's what you're using as a console server?
That has USB ports does it recognise the 8860 console port?
It also had usb console exactly like the 8860, though it probably uses a different usb/serial IC.Steve