IPSEC Tunnel
-
Hi
I have two pfsense 2.4.4-RELEASE-p whith this configuration:
Pfsense A:
wan fff.fff.fff.fff
lan 192.168.10.1
opt1 192.168.50.1Pfsense B:
wan sss.sss.sss.sss
lan 192.168.0.1I have created a IPsec
A:
first phase: public ip remote sss.sss.sss main AES (128 bits) SHA256 2 (1024 bit)
sec.phase: mode tunnel OPT1 192.168.0.0/24 ESP AES (256 bits) SHA256
B:
first phase: public ip remote fff.fff.fff.fff main AES (128 bits) SHA256 2 (1024 bit)
second phase:
tunnel LAN 192.168.50.0/24 ESP AES (256 bits) SHA256
Status of IPsec is ESTABLISHED
If i ping from pc lan 192.168.0.xxx a pc of 192.168.50.xxx is OK but if a ping from pc from address 192.168.50.xxx to address 192.168.0.xxx does not work.
please how can I solve the problem?Thanks
Robert
-
What are the firewall rules on the IPSec tab of both boxes?
-
@dotdash said in IPSEC Tunnel:
What are the firewall rules on the IPSec tab of both boxes?
SITE A:
Protocol Source Port Destination Port Gateway Queue Schedule Description Actions
0 /30.77 MiB
IPv4 * 192.168.0.0/24 * 192.168.50.0/24 * * noneSITE B:
States Protocol Source Port Destination Port Gateway Queue Schedule Description Actions
0 /914 KiB
IPv4 * 192.168.50.0/24 * 192.168.0.0/24 * * none -
@tresrob no help?
If it can help if I ping directly from pfsense site a to the remote network is ok but if i ping from a pc no.
Please help me -
@tresrob
Hey
Sorry for my English
can you ping 192.168.0.1 from 192.168.50.0/24 ?
And show the rules on lan of the pfsense b
And rules on the opt1 pfsense A