<![CDATA[Set gop using SSH or Web Interface]]>Hello,

I have just installed PfSense 2.4.4 on an old laptop. I had some issues getting passed the installation due to "garbage" and being unable to use the console.

At first I thought it was due to incorrect baudrate on the console, but it was actually incorrect set gop. I changed it and I finalized the installation.

Anyhow, everytime I reboot the computer, I lose the setting. Is there anyway where I can get set it permanently? And is it possible to do from either Web Interface or over SSH?

Best regards,
rfx88

]]>https://forum.netgate.com/topic/140225/set-gop-using-ssh-or-web-interfaceRSS for NodeWed, 15 Apr 2026 18:53:44 GMTSat, 02 Feb 2019 10:14:08 GMT60<![CDATA[Reply to Set gop using SSH or Web Interface on Sat, 02 Feb 2019 19:11:19 GMT]]>I just came to the same conclusion. You are correct!

gop set 1

in /boot/loader.conf.local solved my problem!

]]>https://forum.netgate.com/post/821825https://forum.netgate.com/post/821825Sat, 02 Feb 2019 19:11:19 GMT<![CDATA[Reply to Set gop using SSH or Web Interface on Sat, 02 Feb 2019 14:40:50 GMT]]>What exactly are you setting and where?

It sounds like it's a loader variable in which case you can add it to /boot/loader.conf.local (create that file if it doesn't exist).

Steve

]]>https://forum.netgate.com/post/821775https://forum.netgate.com/post/821775Sat, 02 Feb 2019 14:40:50 GMT