<![CDATA[Upgrade to 2.4.4p2 - SG-3100 won't boot]]>I was doing an upgrade from 2.4.4 to 2.4.4_2 via the web interface. The packaged downloaded and I received an "Install Successful" message. When the SG-3100 rebooted, it did not complete and the left two lights are blinking.

I have connected to CLI and executed boot.

The system executes a large number of rm: commands and eventually hangs.

Any assistance is appreciated!

]]>https://forum.netgate.com/topic/140675/upgrade-to-2-4-4p2-sg-3100-won-t-bootRSS for NodeSun, 19 Apr 2026 02:25:47 GMTSun, 17 Feb 2019 00:03:25 GMT60<![CDATA[Reply to Upgrade to 2.4.4p2 - SG-3100 won't boot on Sun, 17 Feb 2019 14:13:27 GMT]]>@rico

Yes, lesson learned.

]]>https://forum.netgate.com/post/824519https://forum.netgate.com/post/824519Sun, 17 Feb 2019 14:13:27 GMT<![CDATA[Reply to Upgrade to 2.4.4p2 - SG-3100 won't boot on Sun, 17 Feb 2019 08:45:34 GMT]]>For the future I suggest you to always take a manual Backup in the WebGUI before you do the Upgrade.
Personally I do manual Backups before any Config change. It takes 2 seconds of my time but let me sleep much better. ☺

-Rico

]]>https://forum.netgate.com/post/824481https://forum.netgate.com/post/824481Sun, 17 Feb 2019 08:45:34 GMT<![CDATA[Reply to Upgrade to 2.4.4p2 - SG-3100 won't boot on Sun, 17 Feb 2019 02:34:38 GMT]]>I had to do a re-install of 2.4.4_2 from USB.

Now I need to figure how to access my saved configuration from the AutoConfigBackup package. I'll post in that forum.

]]>https://forum.netgate.com/post/824455https://forum.netgate.com/post/824455Sun, 17 Feb 2019 02:34:38 GMT