Split tunnel works but no luck with a Full

[_ToXIc_]

Hey all, I followed this guide to setup openVPN but I’m having issue with my full tunnel.

https://youtu.be/7rQ-Tgt3L18

My split tunnel works just fine. The only difference between the two is the CA, assigned IPs and having the checkbox for full tunnel. Is there anything I can look at? The client connects but no traffic is passed.

[Grimson]

Don't use crappy youtube videos, RTFM:

https://docs.netgate.com/pfsense/en/latest/vpn/openvpn/index.html
https://docs.netgate.com/pfsense/en/latest/book/openvpn/index.html

[_ToXIc_]

so for the split and full vpn I pretty much did this https://docs.netgate.com/pfsense/en/latest/vpn/openvpn/openvpn-remote-access-server.html
with the exception of this option being checked for the full tunnel "Force all client-generated IPv4 traffic through the tunnel."

the split tunnel works fine but no traffic on the full

[_ToXIc_]

changed my working split tunnel... turned on "Force all client-generated IPv4 traffic through the tunnel." and no web traffic traffic to LAN works but nothing webwise