<![CDATA[Configuring Route-Maps w/ FRR Via GUI]]>Hello.. I'm trying to figure out how to configure an outbound route-map for FRR to force the prepending of my AS from the GUI. I can see how to create Prefix Lists, but not how to create Route-Maps.

The FRR config that I am trying to apply is this, which works from the vtysh interface. I.E. when I apply the configuration, clear the session and check the remote router, I can see that the AS is pre-pended twice, per the route-map rule.

neighbor 222.55.148.105 route-map PREPEND out
route-map PREPEND permit 10
set as-path prepend 393441 393441

I feel like I simply did not get enough coffee today and I am missing something brain-dead simple. Please tell me why I am an idiot and cannot find this in the interface.

Using PFsense 2.4.4.

]]>https://forum.netgate.com/topic/142674/configuring-route-maps-w-frr-via-guiRSS for NodeThu, 15 Oct 2026 02:32:49 GMTThu, 18 Apr 2019 07:00:42 GMT60<![CDATA[Reply to Configuring Route-Maps w/ FRR Via GUI on Thu, 18 Apr 2019 15:29:29 GMT]]>@jimp of course there is. Because that is the most logical place to put it that I wouldn't look without enough coffee. It actually makes perfect sense because you can do route maps for both frr and zebra from the same interface. Once I figured that out it all just worked. Thanks for the tip.

]]>https://forum.netgate.com/post/838088https://forum.netgate.com/post/838088Thu, 18 Apr 2019 15:29:29 GMT<![CDATA[Reply to Configuring Route-Maps w/ FRR Via GUI on Thu, 18 Apr 2019 15:03:34 GMT]]>There is a Route Map tab under FRR Global/Zebra

]]>https://forum.netgate.com/post/838082https://forum.netgate.com/post/838082Thu, 18 Apr 2019 15:03:34 GMT