Working PF-sense, trying to set up LAN2
-
Hello
I have used PF-sense for a couple of months now. Config:
1 NIC WAN DHCP (my incoming broadband connection)
1 NIC LAN 10.0.0.1 (for my internal network)This works fine. Now I am trying to extend my FW with another NIC:
1 NIC WAN, DHCP (my incoming broadband connection)
1 NIC LAN, 10.0.0.1 (for my internal network)
1 NIC (OPT1) LAN2, 10.0.1.1 (my neighbours network)I have installed the NIC för LAN2 and configured IP adress and DHCP server. I am able to connect my computer to LAN2 and get an IP adress, DNS, Default gateway. But now I am stuck! I cant reach any hosts outside my internal network. When I try to ping a host on internet I get the following message in the FW log:
10.0.1.199 -> 10.0.1.1 @73 blocked by rule deny all10.0.1.199 is my computer trying to connect to the outside world. I have set up an rule allowing all () from the LAN2 subnet to any () host. My first LAN is still working.
It seems that I am a little bit stuck here. Any ideas?
-
Create a firewall rule allowing traffic under
"Firewall" –> "Rules" --> "OPT1"