DHCP OPCION 43
-
I tell you a little what I am trying to implement,
We have an Aruba Wifi controller with 80 operational APs, so I was able to relieve when integrating the Controller they performed the dchp of the APs through a layer 3 SW -dhcp server ip-pool WiFi-APs
gateway-list 172.22.11.254
network 172.22.11.0 mask 255.255.255.0
address range 172.22.11.100 172.22.11.199
expired day 30
option 43 ascii 172.22.11.6Mount a virtual pfSense, which works only as DHCP Server
The question I have is regarding option 43. Add the option to the dhcp, but I have doubts if this is well done.
number 43 / type String / Value 31: 37: 32: 2e: 32: 32: 2e: 31: 31: 2e: 36as I read in a pos should be in hexa (that's why the conversion)
also within the Type options I could see that it is to directly add an address or a host. That's why I doubt it.
Could you guide me a little better?
Greetings.
Buenas Gente,
Les comento un poco lo que estoy tratando de implementar,
Tenemos una controladora Wifi Aruba con 80 APs operativos, por lo que pude relevar al integrar la Controladora realizaron el dchp de los APs mediante un SW capa 3 -
dhcp server ip-pool WiFi-APs
gateway-list 172.22.11.254
network 172.22.11.0 mask 255.255.255.0
address range 172.22.11.100 172.22.11.199
expired day 30
option 43 ascii 172.22.11.6Monte un pfSense virtual, el cual funciona solo como Server DHCP
La duda que tengo es con respecto a la opcion 43. Adicione el la opcion al dhcp, pero tengo dudas si esto esta bien realizado.
number 43 / type String / Value 31:37:32:2e:32:32:2e:31:31:2e:36segun lei en un pos deberia estar en hexa (por eso la conversion)
ademas dentro de las opciones de Type pude ver que esta la de agregar directamente una direccion o un host. por eso la duda.
Me podrian guiar un poco mejor?
Saludos.