WAN interface do not release DHCP adress during Modem outage
-
In WAN DHCP mode,
When the modem Ethernet cable is disconnected, then reconnected (simulating a Modem outage), the DHCP adress is not released, neither renew.
This cause the WAN interface to never come back to life inside load balancer. The load Balancer stay on the backup Wan interface.
Manually realeasing DHCP and renewing on the WAN interface solve the problem.
This is perfectly reproductible.
The problem does not occur if the DSL line only is disconnected.
I didn't verify, but i suppose that the same problem do exist with PPPoE WAN interfaces.
-
I was seeing similar issues with a previous build (gone now…oops). I've updated to a more recent build, 4/20, and will report any remaining WAN DHCP client issues.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy