<![CDATA[Private Internet Access + VLAN]]>I've been working on this for several days and can't figure out why I can't use the openvpn connection with just one VLAN or use reserved IPs. I created an alias so that I can manually assign IP addresses to route through the VPN but it doesn't seem to work. I have the vpn connection working but the VPN connection takes over the entire network each time. Can someone please point me in the right direction?

]]>https://forum.netgate.com/topic/148009/private-internet-access-vlanRSS for NodeWed, 17 Jun 2026 04:30:49 GMTSat, 09 Nov 2019 23:39:47 GMT60<![CDATA[Reply to Private Internet Access + VLAN on Sun, 10 Nov 2019 10:42:58 GMT]]>Yes otherwise openvpn sets the default route to go via the openvpn connection.

Have a look at the routing table pre and post change.

]]>https://forum.netgate.com/post/875021https://forum.netgate.com/post/875021Sun, 10 Nov 2019 10:42:58 GMT<![CDATA[Reply to Private Internet Access + VLAN on Sun, 10 Nov 2019 10:32:22 GMT]]>No the option for "Don't pull routes" it's not set. Do I need to set that?

]]>https://forum.netgate.com/post/875020https://forum.netgate.com/post/875020Sun, 10 Nov 2019 10:32:22 GMT<![CDATA[Reply to Private Internet Access + VLAN on Sun, 10 Nov 2019 08:45:19 GMT]]>@rjamesm said in Private Internet Access + VLAN:

connection with just one VLAN or use reserved IPs. I created an alias so that I can manually assign IP addresses

I’m guessing that you don’t have “don’t pull rules” set in the vpn client.

]]>https://forum.netgate.com/post/875013https://forum.netgate.com/post/875013Sun, 10 Nov 2019 08:45:19 GMT