<![CDATA[Site to Multisite with identical subnets at remote locations.]]>I am looking at implementing a solution to manage all of my customers servers and resources with an enterprise monitoring application.  I need to create VPN tunnels to each remote site.  My problem is that some of the sites have the same subnets and I cannot change them. I was wondering if there was a way to make a customers pfsense translate their subnet into a different subnet so that I can communicate with them.  I have done this with a Cisco vpn-3000 concentrator and was hoping there was a solution for connecting multiple sites to one location where some of the remote sites might have identical subnets.

Ex. 1:    Notice customer 1 and 3 have the same subnet.

Ex. 2:   Customer 3 has translated their subnet into a different subnet so that there is not a conflict for Operations to communicate with both sites simultaneously.

By the way…I did the diagram using Network Notepad which is free of charge at www.networknotepad.com

]]>https://forum.netgate.com/topic/1483/site-to-multisite-with-identical-subnets-at-remote-locationsRSS for NodeSun, 08 Mar 2026 10:22:24 GMTFri, 07 Jul 2006 08:20:41 GMT60<![CDATA[Reply to Site to Multisite with identical subnets at remote locations. on Fri, 07 Jul 2006 09:36:06 GMT]]>Is this something that can be done for a fee?  Is there an alternative solution?  This would be a very helpful feature.

Thanks

]]>https://forum.netgate.com/post/138594https://forum.netgate.com/post/138594Fri, 07 Jul 2006 09:36:06 GMT<![CDATA[Reply to Site to Multisite with identical subnets at remote locations. on Fri, 07 Jul 2006 08:30:57 GMT]]>Unfortunately this is not possible (and has been discussed at the mailinglist already).

]]>https://forum.netgate.com/post/138593https://forum.netgate.com/post/138593Fri, 07 Jul 2006 08:30:57 GMT