<![CDATA[Simple question VLAN Netgear with Pfsense]]>Hello,

I don't get ip adress from pfsense DHCP enabled on the VLAN.

I have just created on Pfsense VLAN50 and DHCP enabled as 192.168.50.x /24

On the switch see my configuration.

LAN cable from the PFSENSE connected to the Port1 on the switch. My laptop connected to Port4. Will not work.

Are my configuration about tagging/untagging on the switch correct?

0ce1c5e2-8ebd-4bb3-86f4-b90d7c90b5d7-afbeelding.png

ddcc03a0-f684-4009-afce-66ae54f8656b-afbeelding.png

ef2fb0d5-17e7-49d5-885b-c31148d24feb-afbeelding.png

222fcbc9-b7cf-4fef-9fce-528f10f52560-afbeelding.png

]]>https://forum.netgate.com/topic/149840/simple-question-vlan-netgear-with-pfsenseRSS for NodeWed, 15 Jul 2026 07:51:27 GMTMon, 20 Jan 2020 20:46:36 GMT60<![CDATA[Reply to Simple question VLAN Netgear with Pfsense on Wed, 22 Jan 2020 15:51:07 GMT]]>@solaris81 Thank you what you have here describe i did that also see the screenhosts, Also this is well the good function. I found where it goings wrong. It was the Turnk port 0 which i must open on my HYPERV adapter... everything works now fine.

]]>https://forum.netgate.com/post/887225https://forum.netgate.com/post/887225Wed, 22 Jan 2020 15:51:07 GMT<![CDATA[Reply to Simple question VLAN Netgear with Pfsense on Wed, 22 Jan 2020 14:28:03 GMT]]>Did you ever get this working?

]]>https://forum.netgate.com/post/887203https://forum.netgate.com/post/887203Wed, 22 Jan 2020 14:28:03 GMT<![CDATA[Reply to Simple question VLAN Netgear with Pfsense on Tue, 21 Jan 2020 22:58:11 GMT]]>VLAN1

Need to tag port 1 where it connects to pfsense
All member ports should be untagged. 1,2,3 and 5

VLAN50

Port 1 should be tagged.
All member ports need to be untagged. In your case, port 4.

]]>https://forum.netgate.com/post/887027https://forum.netgate.com/post/887027Tue, 21 Jan 2020 22:58:11 GMT