Help with NAT
-
Hello,
I am having problems with NAT, i have tried to NAT port 5900 to a computer (to connect trough internet, I know PPOE and IPSEC but I want to do this) and no way, I don´t know why.
I´m going to explaind my config:ADSL(Router ZYxel) Nated all ports to Pfsense IP –->Pfsense (NATed port 5900 to a computer)---->LAN (computer)
In Port Forward -----> WAN --- TCP/UDP --- 5900 ---- 192.168.0.100 ---(ext.: 192.168.1.34) --- 5900 ---- VNC computer
It´s possible the problem was because of natting the ports from DSL router to PFsense and from Pfsense to the computer?
Thanks in advance
David -
As your WAN is a private IP-Adressrange make sure "block private IPs at WAN" at interfaces>WAN is unchecked (it's enabled by default). In case your firwallrule was autocreated when adding the NAT i doubt that the problem is at the pfSense end. You might want to add a "log" for the rule that covers this NAT. You should see a pass event at system>systemlogs, firewall logs when trying to establish the connection. If that doesn'T happen it most probably gets stuck in the router in front of the pfSense.