ASK Configurariont Interface /29 prefix
-
Hello people,
I'm new to PFSense and I'm reading to learn about a tool.My question is as follows:
I have a dedicated internet link with a / 29 prefix. I have the public addresses available:
200.138.102.234
200,138,102,235
200.138.102.236
200.138.102.237
200.138.102.238The ISP's gateway is 200.138.102.233.
In the Interfaces menu, I have doubts about how to configure this link for a WAN (Internet connection interface for use on the local network).
In Type of IPv4 configuration, check the option: Static IPV4
IPv6 configuration type, left as none.In the IPv4 Address configuration, enter: 200.138.102.238/29 and gateway 200.138.102.233.
In Firewall -> Virtual Ips, register:
200.138.102.234
200,138,102,235
200.138.102.236
200.138.102.237My local network is in the 192.168.1.2 and 192.168.1.254 range.
There is already a WAN interface with another provider on a / 24 link, authenticated by PPPoe that is working correctly.My question now is:
Is a WAN interface configuration for using a / 29 correct?
To use this interface for navigation, how do I create or route to my internal network?See some explanatory drawings about the / 29 routing scenario, but the practice was unable to apply and execute.
Add for reading and for any help.
Big hug!
-
The WAN configuration looks correct.
To use this interface for outbound traffic, create or edit a LAN rule and click 'display advanced' change the 'gateway' to your 200.138.102.233 gateway.
For inbound, you can select one of your virtual IPs as the Destination on a port forward. -
Thanks dotdash for the answer.
My firewall is not yet in production, I will test your information and I will return it soon.
Once again, thank you for your kindness.