SG-3100 VLAN Help
-
I am underneath my bed with my dogs hiding from Covid 19 but am trying to get some VLAN’s working on SG-3100.
Here is what I have:
Interfaces| Switch | VLANs
Enable 802.1q VLAN mode checked VLAN Group VLAN tag Members Description 0 1 1,2,3,4,5 Default System VLAN 1 5 1t,2t,3t,4t,5t SAF 2 107 1t,2t,3t,4t,5t IOT
Interfaces | VLANs
VLAN Interfaces Interface VLAN tag Priority Description mvneta1 (lan) 107 0 IOT VLAN (107) mvneta1 (lan) 5 0 SAF VLAN (5)
Interfaces | Interface Assignments
Interface Network port WAN mvneta2 (00:08:a2:0f:b7c3) LAN mvneta1 (00:08:a2:0f:b7cd) IOT VLAN 170 on mvneta1 (00:08:a2:0f:b7cd) – lan (IOT VLAN (107)) OPT mvneta0 (00:08:a2:0f:b7cc) SAF VLAN 170 on mvneta1 (00:08:a2:0f:b7cd) – lan (SAF VLAN (5))
Interfaces | SAF (mvneta1.5)
General Configuration
Enable Checked Enable interface
Description SAFIPv4 Configuration Type Static IPv4 IPv6 Configuration Type None IPv4 Address 10.27.5.1/24
Firewall | Rules | SAF
States Protocol Source Port Destination Port Gateway Queue IPv4 * * * * * * none
I am running a Windows 10 VM under Hyper-V, on the virtual NIC in Hyper-V I have it configured to VLAN 5 as follows:
I have set a static IP on the Windows 10 VM of 10.27.5.5/24 with a default gateway of 10.27.5.1
And now the question - this Windows 10 VM is not able to ping 10.27.5.1, nor anything else. What am I missing?
Thanks in advance for you help.
Paul.
P. S. - my dogs say hi!