Transparent firewall - bridge not work
-
Hello all,
I'm new with pfsense. I install pfsense 1.2.3 stable on a PC with 2 NIC.
WAN = Realtek > rl0 > 192.168.141.203/24 >>>> GO TO >>>> my Lan with many clients
LAN = old winbond > ed0 > 192.168.141.204/24 >>>> GO TO >>>> Webserver (linux)I bridged LAN > WAN
set rules
WAN = PASS * * * * * * ( I think every thing is allowed)
LAN = PASS * LAN net * * * * Default LAN -> anydisable NAT: Firewall > NAT > Outbound > (X)Manual Outbound NAT rule generation (Advanced Outbound NAT (AON))
in the auto created > (X) No NAT (NOT).
from my clienst (it's on the WAN Interface) I can ping WAN & LAN ip. (I heare by bridging pfsense will ignore the LAN IP ??) .. but I cannot ping the webserver behind firewall using 192.168.141.205 on the LAN-Interface.
from Firewall I cannot ping the webserver and from Webserver I cannot ping the Firewall interfaces or someone bevor the wall ..
someone can help`? I found many howtos but all 2 jears old or older. it doesend work.
I use http://pfsense.trendchiller.com/transparent_firewall.pdf
Thanx, Brian