<![CDATA[New Netgate SG-3100 will not show packages]]>Went to set up my new 3100 and when I got to the part to set up OpenVPN i went to download toe client exported but no packages show. I can get onto the internet. I have dns set to 8.8.8.8 I've reloaded the latest firmware of 2.4.5 and still nothing. is show 2 installed that were set up when creating my certs (aws-wizard and ipsec-profile -wizard but when I go to the Available tab nothing shoes up. I tried typing in openvpn I tried open* nothing
P.S. I tried several of the suggestions I found like turning off update, reloading etc.

Any thoughts?

]]>https://forum.netgate.com/topic/154809/new-netgate-sg-3100-will-not-show-packagesRSS for NodeSun, 12 Apr 2026 08:37:03 GMTFri, 26 Jun 2020 02:18:53 GMT60<![CDATA[Reply to New Netgate SG-3100 will not show packages on Sun, 28 Jun 2020 17:24:40 GMT]]>Difficult to say what the issue was. U suspect it was resolved before you ran the command line update. I would expect it to fail there if there was an issue. The advantage of updating at the command line like that is it gives you some error output that usually tells you why6 packages are not available.

As far as I know there is no current issue with the armv6 pkg repo and hasn't been for some weeks at least.

Steve

]]>https://forum.netgate.com/post/921240https://forum.netgate.com/post/921240Sun, 28 Jun 2020 17:24:40 GMT<![CDATA[Reply to New Netgate SG-3100 will not show packages on Fri, 26 Jun 2020 13:47:28 GMT]]>So I connected via the console as was suggested and did the pkg update. It worked. Now I have all the packages installed. Does this mean that there is still something wrong with the GUI regarding this? Do I need to submit a bug report? I've read that this has been an issue for a while but also read that it was supposed to be fixed.

Thank's everyone for your assistance. I was able to install what I needed.

]]>https://forum.netgate.com/post/920916https://forum.netgate.com/post/920916Fri, 26 Jun 2020 13:47:28 GMT<![CDATA[Reply to New Netgate SG-3100 will not show packages on Fri, 26 Jun 2020 13:20:21 GMT]]>Connect to the console or ssh and go to a shell prompt, and try pkg update -f and see what the output shows.

packages.pfsense.org is not used anymore, it's all done via pkg. The same pkg mechanism is used for both packages and pfSense upgrades, so run through the suggestions at https://docs.netgate.com/pfsense/en/latest/install/upgrade-troubleshooting.html

If you still have issues, open a support request with TAC at https://go.netgate.com and they can at least get you talking to the pkg servers.

]]>https://forum.netgate.com/post/920909https://forum.netgate.com/post/920909Fri, 26 Jun 2020 13:20:21 GMT<![CDATA[Reply to New Netgate SG-3100 will not show packages on Fri, 26 Jun 2020 12:48:20 GMT]]>@JLundberg said in New Netgear 3100 will not show packages:

However when I try to ping I get nothing

Replying to ping is just optional.

Read for example https://forum.netgate.com/topic/71706/unable-to-communicate-with-http-packages-pfsense-org

]]>https://forum.netgate.com/post/920903https://forum.netgate.com/post/920903Fri, 26 Jun 2020 12:48:20 GMT<![CDATA[Reply to New Netgate SG-3100 will not show packages on Fri, 26 Jun 2020 12:32:33 GMT]]>I get a valid DNS Lookup:
289a9c59-fef5-4582-a1de-8dde71146563-image.png

However when I try to ping I get nothing

]]>https://forum.netgate.com/post/920900https://forum.netgate.com/post/920900Fri, 26 Jun 2020 12:32:33 GMT<![CDATA[Reply to New Netgate SG-3100 will not show packages on Fri, 26 Jun 2020 12:22:29 GMT]]>Thanks for the replies. I'm guessing the route to packages.pfsense.org is down. I can get to pfsense.org but not to packages.pfsense.org

Can anyone test this for me? this morning?

]]>https://forum.netgate.com/post/920897https://forum.netgate.com/post/920897Fri, 26 Jun 2020 12:22:29 GMT<![CDATA[Reply to New Netgate SG-3100 will not show packages on Fri, 26 Jun 2020 08:22:58 GMT]]>@JLundberg said in New Netgear 3100 will not show packages:

comes back 1msec 172.217.6.174

The GUI test :

3fe7f0bf-9e56-489a-8031-5f6757a20be4-image.png

could say that the test was ... not ok to validate if DNS is actually working at that moment.

Look at my image : the IPs were returned from cache, who lives at 127.0.0.1 or ::1, which is pfSense, the resolver, itself.

More info would be obtained by feeding "packages.pfsense.org" into Diagnostics >Traceroute

When the package list doesn't update - or new updates are not proposed,, etc, the most common reason - by far, is :
People messed up their DNS - and didn't notice it because the LANs networsrk(s) have a working DNS - but pfSense itself not.
Other reasons :
The route to packages.pfsense.org is broken, this is often temporary. As you can see, it has an IPv6, and if IPv6 is not working upstream, pfSense will not fall back to IPv4 and "packages.pfsense.org" seems unreachable.
The package server is down for maintenance.
When a new pfSense update comes out, the server is (to) busy.
Etc.

These are the reasons I can come op with - more might exist.

edit : @chpalmer said the same thing, using less words.

]]>https://forum.netgate.com/post/920854https://forum.netgate.com/post/920854Fri, 26 Jun 2020 08:22:58 GMT<![CDATA[Reply to New Netgate SG-3100 will not show packages on Fri, 26 Jun 2020 04:11:24 GMT]]>Can your box reach packages.pfsense.org?

See if anything here is relevant..
https://docs.netgate.com/pfsense/en/latest/packages/fixing-a-broken-pkg-database.html

Truthfully very few people have issues for one reason or another when you compare the number of systems out there.

]]>https://forum.netgate.com/post/920834https://forum.netgate.com/post/920834Fri, 26 Jun 2020 04:11:24 GMT<![CDATA[Reply to New Netgate SG-3100 will not show packages on Fri, 26 Jun 2020 03:09:02 GMT]]>Why do I see a lot of people having problems with this, except for those that do videos on how to set up Netgate/pfsense?
I'm trying with the GUI but... is there a way to manually load when using Netgate?

]]>https://forum.netgate.com/post/920830https://forum.netgate.com/post/920830Fri, 26 Jun 2020 03:09:02 GMT<![CDATA[Reply to New Netgate SG-3100 will not show packages on Fri, 26 Jun 2020 02:59:12 GMT]]>comes back 1msec 172.217.6.174

]]>https://forum.netgate.com/post/920829https://forum.netgate.com/post/920829Fri, 26 Jun 2020 02:59:12 GMT<![CDATA[Reply to New Netgate SG-3100 will not show packages on Fri, 26 Jun 2020 02:24:47 GMT]]>If you go to Diagnostics/DNS Lookup can you try to lookup something such as google.com and see if you get a return..

]]>https://forum.netgate.com/post/920827https://forum.netgate.com/post/920827Fri, 26 Jun 2020 02:24:47 GMT