<![CDATA[unbound Broken Config]]>I added some custom config into DNS Resolver using the webgui. I was trying to make only certain subnets use pfblocker.

The config i added has broken my install, after clicking save i could still ping LAN interface but no SSH or GUI.

Where can I find the config i added to the custom config using the console and remove it?

]]>https://forum.netgate.com/topic/157543/unbound-broken-configRSS for NodeWed, 15 Jul 2026 17:21:20 GMTSun, 11 Oct 2020 21:14:55 GMT60<![CDATA[Reply to unbound Broken Config on Wed, 14 Oct 2020 20:21:39 GMT]]>@james_h said in unbound Broken Config:

I added some custom config into DNS Resolver using the webgui.

At a loss to what you could of done with resolver that would of broken ssh or the gui? I could see the gui being slower if dns was not working..

Was it that you just couldn't resolve your pfsense name to access ssh or gui? You can always just access via IP.

]]>https://forum.netgate.com/post/940280https://forum.netgate.com/post/940280Wed, 14 Oct 2020 20:21:39 GMT<![CDATA[Reply to unbound Broken Config on Wed, 14 Oct 2020 19:44:00 GMT]]>Thanks very much, that worked.

]]>https://forum.netgate.com/post/940275https://forum.netgate.com/post/940275Wed, 14 Oct 2020 19:44:00 GMT<![CDATA[Reply to unbound Broken Config on Sun, 11 Oct 2020 21:59:25 GMT]]>from the console menu, you can use option 15 to restore a previous working config
the config file is /conf/config.xml
the backups are also there inside /conf/backup

]]>https://forum.netgate.com/post/939839https://forum.netgate.com/post/939839Sun, 11 Oct 2020 21:59:25 GMT