<![CDATA[Add route to host]]>Hi,
I am new to pfSense and have a problem setting up the routing correctly. The underlying problem is that the gateway for the Internet is outside the subnet:

  • IP address: 135.125.25.X
  • gateway: 5.135.X.254
  • Interface: vtnet0

Manually I get it set up under FreeBSD::

/sbin/route add -host 5.135.X.254 -iface vtnet0
/sbin/route add default 5.135.X.254

How can I best configure this in pfSense? It seems to be possible in the interface only to define a static route to a whole network via a gateway, which does not help me.

At the moment I help myself by putting the commands in /usr/local/etc/rc.d/network.sh.

]]>https://forum.netgate.com/topic/158876/add-route-to-hostRSS for NodeSat, 06 Jun 2026 22:18:21 GMTFri, 04 Dec 2020 11:38:24 GMT60<![CDATA[Reply to Add route to host on Fri, 04 Dec 2020 16:51:42 GMT]]>@johnpoz said in Add route to host:

Under system routing, when you add a gateway - bottom of page advanced. You can set that the gateway is not local to your wan subnet

Thank you, @johnpoz ! This was too simple. 🙄

]]>https://forum.netgate.com/post/949517https://forum.netgate.com/post/949517Fri, 04 Dec 2020 16:51:42 GMT<![CDATA[Reply to Add route to host on Fri, 04 Dec 2020 12:10:06 GMT]]>Under system routing, when you add a gateway - bottom of page advanced. You can set that the gateway is not local to your wan subnet

gateway.png

]]>https://forum.netgate.com/post/949424https://forum.netgate.com/post/949424Fri, 04 Dec 2020 12:10:06 GMT