IPsec established, can ping and trace route to remote, but can't get to NAS via Web page
-
I have established an IPsec tunnel between my site and the client's, here are some dets:
Site A: 192.168.254.0/24
Site B: 192.168.1.0/24
My PC: 192.168.254.92
NAS: 192.168.1.20No matter what Firewall rules I have I cannot for the life of me get to the webpage of the remote NAS. I can ping and do a trace route to the NAS and it all works fine, but the for the life of me I cannot get to the webpage of the NAS from My PC.
FW Rules I have tried include, open everything rule on the IPSEC on both sides and created the outbound rule on My side to allow My PC access to the NAS and the reverse on the other side.
If I turn off the rules on my side of the LAN it doesn't try and connect at all and it doesn't show as blocked in the FW log.
I did a wireshark of my connection to the NAS and I can see traffic coming back to My PC from the NAS, but the log on page for the NAS never completes loading.
What adds more confusion for me is that I can establish a OpenVPN connection everything works fine.
Can anyone offer some suggestions as how I go about working out what is going on so that I can get it working?
My end game is to set up a Remote backup from Site B to a NAS at Site A across the IPsec tunnel.
Thanks
Girkers.
-
Can no one help me or point me in the right direction?