Configuring same series of IP in Local and Remote Devices
-
Can i configure same series of IP used in both Local and remote devices for an Open VPN solution. For example, the Open VPN server is configured as 192.168.1.0/24 in IPv4 local networks and 192.168.1.0/24 in IPv4 Remote networks, under the Tunnel settings tab
-
@sumenair
No, there will be no routing between these networks possible with such set up. -
@viragomann, Thanks for your response...
How about if I configure the local devices with 14 IP's as 192.168.1.0/28 (Local IPv4) and the remote sites with the next 14 devices as 192.168.1.16/28 (Remote IPv4).Will this type of configuration be possible?
-
@sumenair
Yes, you can do that. That will work if you set the local and remote network correctly in the OpenVPN settings.