Traffic shaping on physical interface
I have 100Mbps download speed and 4 vlans and would like distribute the bandwidth.
LAN - 70 Mbps
GUEST - 10 Mbps
OFFICE - 10 Mbps
MGMT - 10 Mbps
I am using an SG-1100 device which has 1 physical interface (mvneta0) + 3 port switch. As I read many times the shaper should be applied on the physical interface.
However in the Traffic Shaper I see only the VLAN interfaces not the Physical interface mvneta0.
How can achieve the above traffic shaping between vlans?
@turrican64 You might be looking for a limiter anyway. Shaping prioritizes traffic, while a limiter caps bandwidth usage.