IPv6 is spoty
-
After an upgrade to 2.5.0.
IPv6 seems to be a bit lacking. It happens from time to time that it does not route. Then it comes back, and works again, but a space of time later, it stops again. I do nothing to make it work, just wait.
Gateway status is also missing, despite the fact that I have received an IPv6 address from the ISP.Others with same problem?
-
@cathal1201 My WAN_DHCP6 gateway monitor also shows it's status as unknown, however, I have an IPV6 address assigned and as far as I can tell, IPV6 is usable and routable, etc.
-
@jefftee
If I unblock private networks and loopback addresses on my WAN, the gateway comes back as up.
Try that