Trackinterface Prefix can be only 0
-
Hi,
i'm getting IPv6 via PPPOE and assign it to local LAN via TrackInterface. But the Prefix can be only
0
. If i change it toff
there is no route anymore. (Pfsense 2.5.0)traceroute6 -i br0 google.de traceroute to google.de (2a00:1450:4001:828::2003), 30 hops max, 80 byte packets 1 * * 2003:0:8305:a000::1 (2003:0:8305:a000::1) 4.233 ms 2 2003:0:1304:801f::2 (2003:0:1304:801f::2) 4.932 ms 4.903 ms 4.880 ms 3 2a00:1450:8152::1 (2a00:1450:8152::1) 5.159 ms 2a00:1450:80d7::1 (2a00:1450:80d7::1) 6.114 ms * 4 2001:4860:0:1::5010 (2001:4860:0:1::5010) 5.592 ms 2001:4860:0:1::10d6 (2001:4860:0:1::10d6) 5.573 ms 2001:4860:0:1::5008 (2001:4860:0:1::5008) 5.873 ms 5 2001:4860:0:11e2::2 (2001:4860:0:11e2::2) 5.390 ms 2001:4860:0:11e0::10 (2001:4860:0:11e0::10) 5.842 ms 2001:4860:0:11e2::2 (2001:4860:0:11e2::2) 5.356 ms 6 2001:4860::c:4000:f873 (2001:4860::c:4000:f873) 5.497 ms fra24s05-in-x03.1e100.net (2a00:1450:4001:828::2003) 5.125 ms 5.194 ms
traceroute6 -i br0 google.de traceroute to google.de (2a00:1450:4013:c02::5e), 30 hops max, 80 byte packets 1 * * * 2 * * * 3 * * * 4 * * * 5 * * * 6 * * * 7 * * * 8 * * * 9 * * * 10 * * * 11 * *^C
Information about the Setup
As a side note. Actually there is only one LAN interface which tracks the WAN.
Regards
Dirk -
I just did another test with a second LAN Track Interface on WAN2.
There i used Prefix 1 and after a reboot (why is this necessary?) the second LAN also get it's IPv6 prefix.
So it seems you just can use it with increasing values. So why is this the case?