<![CDATA[Traffic Shaper with LAGG and VLANs]]>Hi Guys

First short question, before we go in detail:

Is traffic shapping on lagg supported? yes or no?
if yes, also with VLANs?

regards tohil

]]>https://forum.netgate.com/topic/163168/traffic-shaper-with-lagg-and-vlansRSS for NodeTue, 14 Jul 2026 20:05:10 GMTWed, 21 Apr 2021 18:27:27 GMT60<![CDATA[Reply to Traffic Shaper with LAGG and VLANs on Thu, 20 May 2021 21:11:56 GMT]]>@tohil said in Traffic Shaper with LAGG and VLANs:

@steveits

Thanks for your fast answer.
But with multiple VLANs on the lagg, I cannot Set an WAN download Bandwith for shaper on LAN vlans without also limiting lan to lan traffic.

This statement is correct isn't it? LAN-to-LAN will also limited, because the egress traffic on an interface will match the shaping rules. This means LAN-to-LAN will be handled like WAN-to-LAN Traffic.

]]>https://forum.netgate.com/post/984037https://forum.netgate.com/post/984037Thu, 20 May 2021 21:11:56 GMT<![CDATA[Reply to Traffic Shaper with LAGG and VLANs on Wed, 21 Apr 2021 19:38:23 GMT]]>@steveits

Thanks for your fast answer.
But with multiple VLANs on the lagg, I cannot Set an WAN download Bandwith for shaper on LAN vlans wirhout also limiting lan to lan traffic.

]]>https://forum.netgate.com/post/979194https://forum.netgate.com/post/979194Wed, 21 Apr 2021 19:38:23 GMT<![CDATA[Reply to Traffic Shaper with LAGG and VLANs on Wed, 21 Apr 2021 19:04:56 GMT]]>https://docs.netgate.com/pfsense/en/latest/interfaces/lagg.html#lagg-and-traffic-shaping

"Due to limitations in FreeBSD, lagg(4) does not support altq(4) so it is not possible to use the traffic shaper on LAGG interfaces directly. vlan(4) interfaces support altq(4) and VLANs can be used on top of LAGG interfaces, so using VLANs can work around the problem. As an alternate workaround, Limiters can control bandwidth usage on LAGG interfaces."

]]>https://forum.netgate.com/post/979190https://forum.netgate.com/post/979190Wed, 21 Apr 2021 19:04:56 GMT