Traffic Shaper with LAGG and VLANs
-
Hi Guys
First short question, before we go in detail:
Is traffic shapping on lagg supported? yes or no?
if yes, also with VLANs?regards tohil
-
https://docs.netgate.com/pfsense/en/latest/interfaces/lagg.html#lagg-and-traffic-shaping
"Due to limitations in FreeBSD, lagg(4) does not support altq(4) so it is not possible to use the traffic shaper on LAGG interfaces directly. vlan(4) interfaces support altq(4) and VLANs can be used on top of LAGG interfaces, so using VLANs can work around the problem. As an alternate workaround, Limiters can control bandwidth usage on LAGG interfaces."
-
Thanks for your fast answer.
But with multiple VLANs on the lagg, I cannot Set an WAN download Bandwith for shaper on LAN vlans wirhout also limiting lan to lan traffic. -
@tohil said in Traffic Shaper with LAGG and VLANs:
Thanks for your fast answer.
But with multiple VLANs on the lagg, I cannot Set an WAN download Bandwith for shaper on LAN vlans without also limiting lan to lan traffic.This statement is correct isn't it? LAN-to-LAN will also limited, because the egress traffic on an interface will match the shaping rules. This means LAN-to-LAN will be handled like WAN-to-LAN Traffic.