<![CDATA[Control the access to port 80, 443, 143 and 993 to devices in the approved mac-id list.]]>Hello,
I want to control the access to port 80, 443, 143 and 993
to devices in the approved mac-id list. is it possible in Pfsense 2.5.x ?

Thanks!

]]>https://forum.netgate.com/topic/164338/control-the-access-to-port-80-443-143-and-993-to-devices-in-the-approved-mac-id-listRSS for NodeFri, 15 May 2026 11:36:30 GMTFri, 11 Jun 2021 02:54:45 GMT60<![CDATA[Reply to Control the access to port 80, 443, 143 and 993 to devices in the approved mac-id list. on Sat, 12 Jun 2021 18:08:40 GMT]]>Thank You NogBadTheBad and johnpoz

]]>https://forum.netgate.com/post/987467https://forum.netgate.com/post/987467Sat, 12 Jun 2021 18:08:40 GMT<![CDATA[Reply to Control the access to port 80, 443, 143 and 993 to devices in the approved mac-id list. on Fri, 11 Jun 2021 09:12:26 GMT]]>Well in an off handed sort of way yes you can ;)

Just assign mac address abc IP address 192.168.1.100 for example, and mac address xyz 192.168.1.101 via dhcp reservations, and then only allow .100 and .101 to access those ports.

]]>https://forum.netgate.com/post/987214https://forum.netgate.com/post/987214Fri, 11 Jun 2021 09:12:26 GMT<![CDATA[Reply to Control the access to port 80, 443, 143 and 993 to devices in the approved mac-id list. on Fri, 11 Jun 2021 06:55:23 GMT]]>@shaw22 No you can’t, pfSense rules are based on IP addresses not mac-addresses.

]]>https://forum.netgate.com/post/987202https://forum.netgate.com/post/987202Fri, 11 Jun 2021 06:55:23 GMT