<![CDATA[Rate package]]>when viewing Traffic graph system logs flooded

Jul 9 11:44:57 	kernel: em1: promiscuous mode disabled
Jul 9 11:44:56 	kernel: em1: promiscuous mode enabled
Jul 9 11:44:53 	kernel: em1: promiscuous mode disabled
Jul 9 11:44:53 	kernel: em1: promiscuous mode enabled
Jul 9 11:44:50 	kernel: em1: promiscuous mode disabled
Jul 9 11:44:50 	kernel: em1: promiscuous mode enabled
Jul 9 11:44:46 	kernel: em1: promiscuous mode disabled
Jul 9 11:44:46 	kernel: em1: promiscuous mode enabled
Jul 9 11:44:43 	kernel: em1: promiscuous mode disabled
Jul 9 11:44:43 	kernel: em1: promiscuous mode enabled

1.2.3-RC2
built on Wed Jun 24 10:43:55 EDT 2009

same with
2.0-ALPHA-ALPHA
built on Thu Jul 9 17:44:57 EDT 2009

]]>https://forum.netgate.com/topic/16522/rate-packageRSS for NodeFri, 09 Oct 2026 17:07:07 GMTThu, 09 Jul 2009 03:56:48 GMT60<![CDATA[Reply to Rate package on Fri, 02 Oct 2009 09:37:01 GMT]]>The same here (pfSense 1.2.2) and additionally it looks like there is too little place to print full IP number.
This tricky display shows an IP shortened by 1 digit.. 129.168.111.12 instead of 192.168.111.123)

I checked php files and it seems so 'rate' program executed under http-PHP returns invalid-shortened IP address, and it happens only for -A option.
Under shell program 'rate' and execution from php works perfectly.

Because 'rate' program is executed by script to make only ONE check only during one refresh - in logs we can see so many communicates.

execute("rate -i {$real_interface} -nlq 1 -A -c {$intsubnet}….

-q 1 option = make one report

]]>https://forum.netgate.com/post/202408https://forum.netgate.com/post/202408Fri, 02 Oct 2009 09:37:01 GMT