Multi-layered traffic limiting/shaping
I wonder if the following is possible:
Have let's say 13 hosts in one VLAN.
The total network bandwidth is 100mbps, it should not be exceeded.
10 hosts should be able to reach maximum 10mbps each, but all 10 of them should not exceed 60mbps together.
2 hosts should be able to reach maximum 50mbps each
1 host should be able to reach maximum 100mbps
All of them together should not exceed 100mbps.
I get it how to approach the situation if I have the hosts in separate vlans with a shaper. That is not possible unfortunately.
Also, the firewall being stateful, I can't stack rules.
Any ideas please?