<![CDATA[Rules not allowing traffic between networks]]>I can't figure out what I'm missing in my configuration. I need another set of eyes to help me.
Here are some configuration screenshots:
2442d992-427d-4f07-8dfe-62ec7075f600-image.png
LAN = 10.100.3.253/23
Printers = 10.100.9.253/24
85a95de8-7554-432d-9daf-0432391e11e8-image.png
8733672d-e35d-4647-bfba-8d767a18391f-image.png
63d9cf39-2345-444f-a05e-c0d639529364-image.png
4deea38f-c4c1-47e8-9c9d-53b13da0d205-image.png

I can't ping from 10.100.3.8 to 10.100.9.248 or vice versa. I'm pretty sure I have this configured correctly. The firewall rules work for the other interfaces I have setup. Anything anyone can think of for me to check to see if I over looked something?

]]>https://forum.netgate.com/topic/166898/rules-not-allowing-traffic-between-networksRSS for NodeWed, 17 Jun 2026 19:25:38 GMTThu, 30 Sep 2021 23:02:34 GMT60<![CDATA[Reply to Rules not allowing traffic between networks on Thu, 30 Sep 2021 23:15:41 GMT]]>Both rules have logging turned on. The rule on the LAN interface shows the allow logs, but no ping reply is returned. I did a tcpdump on the device with 10.100.9.248, but I don't see the ping requests arriving at the device.
b92b1cf7-22a7-481d-a732-4000becca98b-image.png

When pinging from 10.100.9.248, there are no logs that show up in pfSense.
c5d1847e-fb2c-4c64-938a-69ce01b239ab-image.png

I just can't figure this out...

]]>https://forum.netgate.com/post/1003897https://forum.netgate.com/post/1003897Thu, 30 Sep 2021 23:15:41 GMT