<![CDATA[Do I need to modify default NAT setting when setting up Dual WAN]]>On the Pfsene guide below no change in NAT setting is required for dual WAN:

http://doc.pfsense.org/index.php/MultiWanVersion1.2

However on this guide below it's need to change to AON instead of automatic:

http://katsudon.ipos-asia.com/?p=6

Question is can I just left NAT outbound to be automatic or do I need to change it to AON like in the second link.

nat.jpg
nat.jpg_thumb

]]>https://forum.netgate.com/topic/16743/do-i-need-to-modify-default-nat-setting-when-setting-up-dual-wanRSS for NodeTue, 13 Oct 2026 22:00:09 GMTFri, 17 Jul 2009 18:24:04 GMT60<![CDATA[Reply to Do I need to modify default NAT setting when setting up Dual WAN on Sat, 18 Jul 2009 15:16:01 GMT]]>Whenever you use a MultiWAN Setup You create a New Gateway IN Load Balacing Services.
So all the request from the client side has to go through that new Gateway.
You will set in Firewall Menu–> Rules--> LAN Tab

]]>https://forum.netgate.com/post/203084https://forum.netgate.com/post/203084Sat, 18 Jul 2009 15:16:01 GMT<![CDATA[Reply to Do I need to modify default NAT setting when setting up Dual WAN on Fri, 17 Jul 2009 19:48:01 GMT]]>You don't need to change it. Just the default firewall rules need to change.

]]>https://forum.netgate.com/post/203051https://forum.netgate.com/post/203051Fri, 17 Jul 2009 19:48:01 GMT