pfSense HA on Proxmox, DHCP strangeness

Urbaman75

Hi,

I have a pfSense HA setup on a 3-node Proxmox cluster.

Everything seems ok, but dhcp on a VLAN seems not to work properly (see image).
Also, only VLAN10 seems to properly show DHCP leases, VLAN100 on which I have three devices do not show them (seems not to get MAC/hostname, if I check "Show all configured leases" I see the leases without the mac/hostname

Where can I check for debug/fix this?

Here's the configuration:

Switch:
Port 1-3 Trunk 1 (native), 10, 50, 100
Port 4 LAN (VLAN10) downstream
Port 5-7 Trunk 1 (native), 20, 40, 60
Port 8-10 30
Port 11-13 100
.....

Proxmox (each node) :
Eno0 - External
Eno1 - Trunk 1 (native), 10, 50, 100
Eno2 - Trunk 1 (native), 20, 40, 60
Eno3 - to Ports 8-9
vmbr0 - eno0
vmbr1 - eno1
vmbr2 - eno2
vmbr3 - eno3

pfSense:
vtnet0 - Proxmox vmbr0
vtnet1 - Proxmox vmbr1
vtnet2 - Proxmox vmbr2
vtnet3 - Proxmox vmbr3

WAN on vtnet0
VLAN1, 10 (LAN), 50, 100 defined on vtnet1
VLAN20, 40, 60 on vtnet2
VLAN30 on vtnet3
All VLANS tagged.

On the VLANs I can access I get internet access, but VLAN50 stays in recover state and all VLANS but 10 receive MAC/HOSTNAME

Thank you for your advice!

Urbaman75

Ok, found out the problem, maybe.

there was a space in the Gateway IP in VAN50 dhcp settings
also checked "Time from UTC to Local"

With both changes, now DHCP works flawlessly.

Thank you.