DCHP not sending router/gateway to endpoint after fresh install
-
cross-posted from Installs & Upgrades
Burned ISO to a DVD.
Performed fresh install of v2.5.2 CE onto Protectli hardware.
Connected macOS client system to LAN to configure pfSense.
Mac pulls standard DHCP information - EXCEPT - the "Router" field is blank (as shown in the image)
I can log in to the web UI and run the wizard, but even when the changes reload, the Router/Gateway information is blank.
I experienced the same results with v2.6 CE using the same process.
The only way I've gotten around this has been to wipe the system and install v2.5 CE - after which, everything works as expected. I was then able to successfully upgrade to v2.6 without incident.
What could have been introduced after v2.5 that would cause this behavior? It's not a huge deal to start with 2.5 and upgrade, but I really shouldn't have to. Hoping for a solution.
-
@wildfrog What is listed as the router in the DHCP server on LAN?
If you really, really want to see what is going on, packet capture the DHCP traffic on the LAN and post it. Particularly interested in the DHCPOFFER from the server.